|
Quantity
|
Cost
|
||
|
|
|||
Lighting set for pedestrian crossings Stolb Park SE-CW
Stolb Park SE-CW is a ready-made kit for lighting unregulated pedestrian crossings, both in the city and out of the town. This set was created on the basis of the Stolb Park SE luminaire in which the T7.3 traffic light was integrated, and works in the yellow flashing mode with a frequency of 1 Hz, was additionally integrated.
The design is made of a round pipe with a diameter of 159 mm with a wall thickness of 3 mm. The use of such a massive profile is due to the behavior of the supports under wind loads and the movement of vehicles that create vibrations, and as a consequence, the oscillations of the support, which adversely affects the mechanical properties of the support (profile uniformity, resistance of welds and corrosion coating) and LED module and electrical connections.
The Stolb Park SE luminaire is protected against corrosion by means of powder coating with preliminary cleaning of the structure and application of a zinc-containing primer. There is a choice of any RAL palette for painting the support without changing the cost. Additionally, gas-thermal zinc spraying at a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 is used to protect the support flange.
As a light source, the LED module on high-quality Philips LED components is used, which guarantees stable operation of the LED light module for 5 years. The power source for this system is the Philips driver, which has the best value for money on the market. This combination allows you to qualitatively, reliably and stylishly illuminate any area.
Features
| Height | 3000/4000/5000/6000 mm |
| Profile | round pipe with a diameter of 159 mm |
| The wall thickness of the profile | 3 mm |
| The thickness of the mounting plate | 10 mm |
| Power of the LED module | 30/40/50/60 W |
| Number of LEDs | 12/24 |
| CRI and color temperature | > 70 for 4000K /> 70 for 3000K |
| Nominal luminous flux | 3400 - 6900 Lm |
| Residual luminous flux100,000 h | 80% |
| Optics | T2, T3, T4 (default T3) |
| Rated supply voltage | 220 - 240 V; 50 - 60 Hz |
| Power factor | ≥0.95 |
| Type of traffic lights | Т7.3 |
| Degree of protection
|
IP54 IP65 IP65 |
| Electrical safety class | I |
| Weight | 50-110 kg |
| Construction materials
|
Steel PMMA |
| Corrosion protection | Zinc-based primer, gas-thermal spraying of zinc to a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 |
| Color | Powder coating, any other color according to the RAL palette - under the request without change of cost |
| Operating temperature range
| -35 ° C ... +55 ° C
|
| Application | Pedestrian croses |
| Warranty period | 2 years |
| Country of origin | Ukraine |
| Delivery set
| - lighting support with integrated LED module, driver and optics; - input panel TV-1 with fuse 10A; - anchor device FP1 (for 3 supports 3 and 4 m high) and FP4 for supports 5 and 6 m high). |