USD
0
My order

LED Smart Park Lighting Stolb Park CUT-3S

Article: CUT3S/S/30/830

Park LED lamp Smart Stolb Park CUT-S

Smart Stolb Park CUT-S -  is a complex solution developed on the basis of  Stolb Park CUT-S, which combines a park lighting pole with a built-in LED module and the ability to integrate additional SMART modules:

  • Programming of the lamp driver (dimming schedule for energy saving) with the possibility of exit this mode via the motion sensor (included in the basic configuration SMART CUT);
  • Motion and light sensors (included as standard with SMART CUT);
  • USB ports for charging mobile gadgets (optional);
  • Wi-Fi module (optional);
  • Chargers for electric cars (optional);
  • Sensors of air quality analysis (optional);
  • Camcorders (optional);
  • Loudspeakers (optional).

It will not only illuminate the area, but create a safe and comfortable space thanks to smart modules.

The Smart Stolb Park CUT-S series as well as the Stolb Park CUT-S series is variable and allows you to choose the power of the LED module depending on the task or lighting calculation. But unlike the latter, the Smart series allows you to integrate a variety of "smart" features into the lighting system. By default, each Smart support has an intelligent Philips Xitanium driver, motion and light sensors that allow programming this lamp.


Functionality of the lighting system

Programmed dimming

By default, each support equipped with an intelligent Philips Xitanium driver and a sensor (motion and light) system. The intelligent driver from Philips allows you to program the dimming profiles, what is mean to create a diagram of the light brightness in accordance to the time of day (see Fig. 1), which aims to save electricity by reducing light flux during the night.


Fig.1 - Schedule of dimming 100% -70% -50% -70%

 

How does it work?

The system is switched on by a signal from the light sensor, after that during the period of the lamp operation there is a decrease in power depending on the time of day and its subsequent turning off the onset of dawn.

In most cases, it is necessary to adapt the profile during the year, based on the calculation of the average duration of previous inclusion periods. This data is used to estimate the current time, which is taken as a virtual clock. Usually, the time of turning on and off the lights is associated with sunrise and sunset. During the year, this time changes smoothly. Dynadimmer calculates the average duration of the driver for five of each previous "stable" night. Such nights mean periods of the on state lasting not less than 4 hours with a spread of not more than 1 hour. After installing Dynadimmer dimmers, it takes three stable nights to determine the virtual clock. In this phase of synchronization the light is not regulated.

Depending on the geographical location, the LED lighting system at sunset and sunrise is not always symmetrically located relative to the north. Simply put, in different cities the sunset and sunrise at different times. The program allows you to determine the required time offset for a given area, indicating its coordinates.

Short voltage interruptions are perceived by the program in such a way that they are not taken into account when calculating the average duration of the lamps. The duration of only stable nights is taken into account.

In the event that a person appears in the park or on the street, a motion sensor will work, which will smoothly remove the lamp from the dimming mode (increase the power to 100%) for comfortable lighting of the area in front of the person. It is also possible to connect several supports (groups) to one motion sensor in order to illuminate the probable direction of human movement in the park or street.

 

Wi-Fi module

The Internet provides a comfortable being on the street, in the park, in a public square, but in places where there are problems with it, the LED Smart lamp Stolb Park CUT-S will provide Wi-Fi coverage thanks to the modem. This modem, depending on how you access the Internet, can have two configurations:

  • 3G / 4G Wi-Fi modem that receives the Internet from the 3G / 4G network (tariff package is not included) and distributes it over the Wi-Fi network.
  • A Wi-Fi modem that accesses a network with a twisted pair or optical cable and distributes it over a Wi-Fi network.

 

Electric car charging module

The Stolb Park CUT-S LED Smart Lamp can be a great solution for parking lights, as its design can include a module for charging electric vehicles. This solution will illuminate the area and serve as a charging station for electric vehicles.

  • Charger: AC power 3.7 kW; 7.4 kW and 11 kW;
  • Type 2 electrical outlet;
  • The possibility of an access key to activate charging using RFID or QR-code;
  • Lock for safety during charging.

 

USB charger

Placing the Stolb Park CUT-S Smart Lamp in the park or directly near the recreation area (park benches or picnic areas) allows it to be used as a module for charging mobile phones and tablets thanks to USB sockets placed on it (2 ports of 5V and 2.1A per port) . The phone is placed on a special platform located at a height of 1 m from the ground or a special holder (see Fig. 2).

Fig. 2 - Mobile phone holder for lighting support

 

Camcorders

Security in public spaces (parks, squares, streets) is an integral part of our lives. Therefore, the complete set of this lighting support with a street IP video camera will ensure safety in public places, and due to the strong design of the support Stolb Park CUT-S, the image quality will not suffer from its own oscillations in strong winds or vibrations caused by the roadway.

  • Full HD resolution (1980 x 1080p);
  • Image optimization (contrast, night vision, high brightness);
  • Optimized data management (selective / delayed data transfer, integrated data storage (SD card slot));
  • Launch event:
    • motion detection;
    • video analytics;
    • unauthorized actions.

 

Loudspeakers

Public squares or parks and squares require loudspeaker systems, for example, to broadcast background music, local radio, broadcast messages or advertisements (commercial or social). The Stolb Park SE system allows you to combine this by placing a loudspeaker in the support of the speaker for audio content.

  • 100 V speakerphone system;
  • Frequency range: 100 - 18,000 Hz;
  • Output power 20 W;
  • Weatherproof / adapted for outdoor and indoor use;

 

Monitoring station of air quality

The air quality monitor is becoming an integral part of the lives of metropolis. Therefore, the Smart Stolb Park SE series of park luminaires allows installing an air quality monitoring system in it, which will allow better control of the air condition in the city.

  • fixing the concentration of CO2 and PM 2.5 and 10 particles;
  • temperature and air humidity.

Features

Height

4000 mm

Profile

120х120 mm

The wall thickness of the profile

3 mm

The thickness of the mounting plate

10 mm

Power of the LED module

30 W

Number of LEDs

48

CRI and color temperature

> 80 for 4000K

Nominal luminous flux

4200 Lm – 4000K

Residual luminous flux100,000 h

80%

Optics

T2, T3, T4 (default T3)

Rated supply voltage

220 - 240 V; 50 - 60 Hz

Power factor

≥0.95

Surge protection

10 kV

Dimming(DALI or 1-10V)

+

Lighting driver programming

Standard schedule 100% -70% -50% -70% for street lighting

Motion and light sensor

+

Wi-Fi module

optional

Electric car charging module

optional

USB charger

optional

Camcorders

optional

Speakers

optional

Air quality monitoring station

optional

Degree of protection

  • Optical module
  • Drivers

 

IP54

IP65

Electrical safety class

I

Weight

70 kg

Construction materials

  • Corps
  • Diffuser

 

Steel

PMMA

Color

Powder coating, color "Live coral" (any other color according to the RAL palette - under the request without change of cost)

Operating temperature range

-35 ° C ... +55 ° C

Application

Pedestrian areas, bike paths, parks, squares, alleys

 

Warranty period

3 years

Country of origin

Ukraine

 


Visualization

Be the first to review
New review or comment
Login with
Rate the product
Send
Height, m
3 3.5 4
Power, W
Color temperature
$397
В наявності
  • Independent removal from the point of issue;
  • Courier delivery across Kiev;
  • Delivery across Ukraine is carried out by services Nova Poshta, SAT.

More about delivery conditions →

  • Non-cash payment for a legal entity;
  • Payment for goods when ordering with delivery in Ukraine;
  • Payment by Visa / MasterCard payment card;
  • In cash.

Learn more about payment terms →

 

Warranty from the manufacturer 36 months, exchange / return of goods within 14 days.
More about returning and exchanging goods →

 

 

Characteristic
Title LED Smart Park Lighting Stolb Park CUT-3S
Up