USD
  • UAH
  • EUR
0
My order

LED street luminaire Schreder Ampera Midi 115 Watt

Article Ampera Midi 115 Вт
В наявності
Description

LED street luminaire Schreder Ampera Midi 115 Watt

VERSALITY AND AESTHETIC CONSISTENCY

The Ampera product range sets new standards in LED lighting, offering efficient and versatile solutions with the shortest payback time. Ampera's long service lifetime and maintenance service are minimized maintenance, assuring a minimum total cost of ownership.

Available in 3 overall dimensions, with scalable optics up to 35,200 Lm and selective light type, the Ampera meets all street and road lighting requirements. This line is the perfect solution for replacing luminaire with lamps. Usually, the Ampera Mini is an alternative to the 70W traditional light sources while the Ampera Midi and Ampera Maxi provide significant energy savings when replacing the 150 and 250W luminaires.

SMART LIGHTING

Ampera lamps can go in the set with elements of the Schreder OWLET IoT control systems [more details] for autonomous operation regime, in offline or interacting network or supplied only with the NEMA 7 connector for installation of other lighting control systems.

All the Ampera luminaires have the ability to use programmable dimming and and function "light on demand" with motion sensors using (as an option, it is possible to position the put motion sensor on the luminaire's body) to adapt lighting to the real needs of the place and time and create the safest and most comfortable environment [more details].

As an option, Schreder Ampera can be equipped with a Bluetooth module which allows to program (program dimming) and analyze the state of individual single luminaire [more details].

THE CONCEPT OF "FUTUREPROOF"

Ampera fits the concept FutureProof. If necessary or with the further development of LED-technology, the optics and control unit of the luminaire could be replaced with more modern ones without using of a tool.

BACKLIGHT CONTROL - AVOIDING EXCESSIVE LIGHTING

As an option: Some Ampera versions may be combined with a backlight control system. Due to the additional panel inside the corps of the lamp, the light flow behind the luminaire is minimized, accordingly avoiding getting light inside the houses.

Light distributions without limitation of the backlight

Light distributions with limitation of the backlight

CONSTANT LIGHT FLOW DURING THE EXPLOITATION

The usual solution takes into account the depreciation of the luminous flux over the time, which leads to excessive lighting and, consequently, excessive electricity consumption at the beginning of the installation’s service life. Over the time, the light output slowly decreases to the minimum required level by the end of the lifetime of the installation. (Graph A).
Ampera luminaires work differently, having the function of constant luminous flux (constant luminous flux - CLO).

Ampera controls its energy consumption during the whole lifecycle of the lamp in autonomous regime and with high accuracy to constantly provide the required level of light flux - no more and no less (Graph B).

Thereby, the CLO function gives the additional energy savings of up to 10% during luminaire exploitation.


Teceo - Constant Light OutputTeceo - Maintaining constant luminous flux


Technical characteristics

Power 115 W
Quantity of LED 48 LED
Color temperature and CRI 3000К - CRI80 4000К - CRI70
Nominal luminous flux (lm)* from 9900 - to 12100 Lm from 11800 - to 14400 Lm
Residual luminous flux 100.000hr tq 25°C** 90%
Optics 5102AS/5120AS/5121AS/5137AS (other optics - custom-made)
LED module current 800 mА
Nominal supply voltage 220 - 240 V; 50 - 60 Hz
Power coeficient >0.9
Surge protection​​​​ 10 kV
Dimming (DALI or 1-10V) Present [more details]
Sensor  PIR (as an option, please specify when ordering) [more details]
Opportunity to control [more details]  

Wireless control by the ZigBee protocol

The possibility of supply with NEMA 7 connector for installation of control system (as an option, please specify when ordering)

Bluetooth wireless control

The possibility of supply with a Bluetooth module for program dimming and diagnostics via mobile phone  [more details] (as an option, please specify when ordering)

As part of the Schreder OWLET IoT remote lighting control system

The possibility of supply the Schreder OWLET IoT system with Schreder LUCO P7CM controller [more details(as an option, please specify when ordering)

Luminaire driver programming

Dimming-free, programmable dimming, steady light flux (CLO) [more details]

Degree of protection​​​​

IP 66 (***)

Impact resistance (glass)

IK 09 (****)

Electrical safety class

I or II (***)

Weight

11.5 kg

Aerodynamic resistance​​​​​​ 0.115

Construction materials

 

Housing 

Die-casted under the pressure of aluminum alloy

Diffuser

Tempered glass

Color

AKZO 900 gray (any other color RAL or AKZO - custom-made)

Temperature range of operation -40 °C ... +55 °C
Mounting

Ø42 - 60 mm for coronary and console installation with adjustable lamp angle (0° - 15°)

(possible supply of mounting unit of Ø32 - 48 mm and Ø76 mm)

Recommended installation height of the luminaire 9 - 12 m
Warranty period 120 months according to the Schreder Guarantee Terms

View from the top

 

Mini

Midi

Maxi

A

583 mm

674 mm

900 mm

B

340 mm

436 mm

438 mm

View from the side

 

Mini

Midi

Maxi

C

90mm

132mm

135mm


LIGHT DISTRIBUTION

LED optics 5102

Different types of optics available.


Sample images for Schreder Ampera


Additional information about this product by phone request

New review or comment
Login with
Rate the product
Send
$404
Войдите на сайт чтобы
добавить товар в список желаний
Quick order
Characteristic
Type of light source Світлодіод
Power 115
Color temperature of light 3000 К, 4000 К
Manufacturer Schreder
  • Independent removal from the point of issue;
  • Courier delivery across Kiev;
  • Delivery across Ukraine is carried out by services Nova Poshta, SAT.

More about delivery conditions →

  • Non-cash payment for a legal entity;
  • Payment for goods when ordering with delivery in Ukraine;
  • Payment by Visa / MasterCard payment card;
  • In cash.

Learn more about payment terms →

 

Warranty from the manufacturer 36 months, exchange / return of goods within 14 days.
More about returning and exchanging goods →

Up