Set of autonomous park lighting kit on solar battery SLP 4M-1/B/12/150
Solar lamps for parks and gardens powered by energy from sunlight constitute a wonderful alternative to classic park and decorative lighting, especially in places far from infrastructure where it is not economical to provide electrical power. Every solar lamp is independent and ready to work immediately after installation. The installation of solar lamps is fast and easy. It does not require complicated project documentation or consultation with the local power provider.
Autonomous lighting system kit consists of:
- headrest (bracket for mounting the lamp);
- anchorage device for mounting the support;
- photovoltaic panels with mounting on a support;
- LED module;
- smart controller that combines battery and lamp driver functions;
- gel battery;
- anti-vandal, sealed box for mounting the battery in the ground.
During the day, the solar panel, when the sun is shining, generates electricity and stores it in the battery. At night or in cloudy and rainy days, the controller can use the sensors to calculate the daylight and automatically turn on the light.
The series of solar decorative lamps for parks is distinguished by their excellent look, superior quality and functionality. The lamps combine with old town architecture in a perfect way. They also make wonderful decorations of parks or squares.
Solar lamps powered by energy from sunlight constitute a wonderful alternative to classic street lighting, especially in places far from infrastructure where it is not economical to provide electrical power. Every solar lamp is independent and ready to work immediately after installation. The installation of solar lamps is fast and easy. It does not require complicated project documentation or consultation with the local power provider.
Solar lighting is used worldwide. It is a kind of innovative and energy saving lighting product which uses high power LED lights and are powered by a set of photovoltaic panels. The generated light does not contain UV, infra-red, heat or radiation. Our street lamps are a form of "green" environmentally friendly sources of light which provide energy saving.
Characteristics of SLP 4M-1/B/12/150
Power: 1 x 150 W Panel type: single crystal, tempered glass 3.2 mm thick, coated, absorbing solar radiation, panels tested in accordance with IEC 61215 for snow loads up to 5400 Pa (approx. 5.4 kN/m2) and IEC 61730. Certificates available: ISO 9001, ISO 14001, OHSAS 18001, ISO 2859-1
|LED module||Power: 12W
Operating voltage: DC 12V
LED life: >50,000 hours
Degree of protection: IP65
Luminous flux: >1100 lm
Operating temperature: -30 ℃ .. +60 ℃ The appearance of the lamp can be in two configurations - such as "Ball" or "Bump". Each of which can have a transparent diffuser or a type of "frost" (dull white)
|Controller||MPPT 10A - 12V Protection rating: IP68 Weight: 1 kg The switch-on time lamp is determined by an integrated dusk sensor (light sensor). The MPPT controller, unlike PWM, allows the most efficient use of all the power of the solar panel (by tracking the maximum power generated by the solar panel) and the stages of the battery charge (charge, saturation, equalization, charge support) and on this basis determines what current must be fed into the batteries.|
|Battery||1 x 80AH 12V - NPG Gel Battery Specialized for Solar Powered Equipment, Fully Sealed, Has Full Deep Discharge Cycle, No Maintenance|
|Battery box||PVC material Weight: 3 kg Designed to be installed underground, avoiding high summer temperatures or too cold winter temperatures. It is vandal-resistant and waterproof. Able to dissipate heat from the battery. Included is a PVC pipe with a system for forced recirculation of crankcase gases for cables.|
|Support and bracket||
Height: 6 m Luminaire installation height: 5.2 m Conical reinforced support, made in accordance with EN 40-5: 2002 and EN 40-2 in S355 steel (headrest and battery mount rack in S235 steel). CCorrosion protection - hot dip galvanizing in accordance with EN ISO 1461, after which the support is coated with black paint. Vehicle impact resistance: class "0" in accordance with EN 12767. Certificates of resistance in accordance with EN 40-3-1, safety class "B", class "2" . The design conforms to the standard: EN 1090. The calculation of the support is made for the II category of terrain and the pressure of the wind speed of 300 Pa (depending on the place of installation we perform the calculation of endurance in accordance with the wind district of Ukraine and the terrain category)
|Anchor device||F100 M20|
|Work time||8-10 hours a day (with full power of the LED module), the battery capacity is designed for up to 4 full cloudy, rainy and windy days.|
|Installation guidelines||This set is suitable for areas with an average annual peak solar power of 4 ~ 3.5 hours per day|
|Certificates||A Ukrainian Certificate of Compliance is available. Scope:
– ДСТУ EN 55015:2014
– ДСТУ EN 61000-3-3:2014
– ДСТУ EN 60335-1:2015
|Producer country of support||Poland|
Possibility of forming the support with powder paint according to the RAL palette
Supplied with Bluetooth interface with software for programming and remote control of the fixture
The system configuration may be changed depending on the client or project requirements
Additional information by phone or e-mail. Depending on the quantity, additional discounts are possible.