SMART lighting system STOLB MODULAR

CHARGING FOR ELECTRIC VEHICLES (EV CHARGER)

• The EV charger module has an integrated charger for electric vehicles of the AC type of increased power up to 22 kW (Mode 3) and is equipped with a Type 2 connector;
• Access to the charger can be controlled by RFID and / or by connecting to the billing system of any charging station operator via the open communication protocol OCPP 1.6J;
• The information is transmitted via a 2G / 4G modem and / or a wired Internet connection.
• Using the open Linux platform allows you to use the charging station in the Internet of things and combine it with the concept of a smart city and smart power grids for optimal power distribution;
• The Type 2 connector has silver-plated contacts to reduce the transient resistance connecting the charging cable, as well as an integrated temperature sensor that protects the connector from overheating (when using a low-quality charging cable);
• There is a system of locking the connector during charging, as well as automatic unlocking in the event of a power failure;
• There is an RGB backlight on the connector to indicate the charging status: green - charging is available; blue color - charging process started; red - an error has occurred;
• Electricity meter in accordance with the MID directive;
• IP65 / IK08 / RCD / SPD / OCPP 1.6J / Modbus / TCP / MQTT;
• Compliance with ISO / IEC 61851-1 & 22; ISO / IEC 62196; V2G ISO 15118;
• It is also available a version without a charging module for electric vehicles.

LOUNDSPEAKER

• The LOUNDSPEAKER module is designed to play background music, broadcast radio, advertisements, notifications and warnings or as a speaker for a street theater;
• This module can be used in 70 V or 100 V systems and also has the ability to work in 8 Ohm mode (the required operating mode is set during installation of the module);
• The body of the column is made of steel protected from corrosion by high-quality polymer paint with preliminary application of zinc-containing primer and ABS plastic;
• The LOUNDSPEAKER module is specially designed for outdoor use and has protection class IP67 and operating temperature range from -25 ° C ... +65 ° C;
• Power: 15 / 7.5 / 3.75 / 1.9 watts;
• Effective frequency range: 95 Hz - 19.5 kHz;
• Made on BOSCH components.

Wi-Fi ACCESS POINT

• The Internet provides a comfortable stay on the street, in the park and in the public square, but in places where there are problems with it; STOLB MODULAR with Wi-Fi module will provide Wi-Fi coverage thanks to the built-in modem;
• This modem, depending on how you access the Internet, can have two configurations:
  • 3G / 4G Wi-Fi modem that receives the Internet from the 3G / 4G network (tariff package is not included) and distributes it over the Wi-Fi network;
  • A Wi-Fi modem that accesses a network with a twisted pair or optical cable and distributes it over a Wi-Fi network;
• There is an ability to combine multiple Wi-Fi modules for creation a seamless coverage;
• Wi-Fi 4 (802.11n) /2.4 GHz / PoE;
• Made on MikroTik components; TP-Link.

VIDEO CAMERA MOD 1

Security in public spaces (parks, squares, streets) is an integral part of our lives. Therefore, the complete set of the STOLB MODULAR support with an outdoor IP video camera will ensure safety in public places. Due to the strong metal construction of the support, the image quality will not suffer from the own oscillations of the support in strong winds and will provide high vandal resistance.

• The CAMERA 180 module is available in two variations: MOD 1 and MOD 2. The only difference between them is in the design of the base for the IP camcorder;
• 1/3 "progressive CMOS with a sensitivity of 0.008 Lux;
• Video Intelligence (IVS). Thanks to an advanced video algorithm, the camera supports intelligent detection, such as line crossing and intrusion into the area;
• IP67 / IK08;
• Made on Dahua components, Hikvision.

VIDEO CAMERA MOD 2

Security in public spaces (parks, squares, streets) is an integral part of our lives. Therefore, the complete set of the STOLB MODULAR support with an outdoor IP video camera will ensure safety in public places. Due to the strong metal construction of the support, the image quality will not suffer from the own oscillations of the support in strong winds and will provide high vandal resistance.

• The CAMERA 180 module is available in two variations: MOD 1 and MOD 2. The only difference between them is in the design of the base for the IP camcorder;
• 1/3 "progressive CMOS with a sensitivity of 0.008 Lux;
• Video Intelligence (IVS). Thanks to an advanced video algorithm, the camera supports intelligent detection, such as line crossing and intrusion into the area;
• IP67 / IK08;
• Made on Dahua components, Hikvision.

LIGHTING MODULE LIGHT 180

• The Light 180 module is designed to illuminate a specific zone or area, which allows you to create a variety of lighting and lighting options;
• Color glow temperature, power, type of optics, availability of control protocols, programmable dimming, etc. - is variable and may be available for the Light 180 module;
• The body of the lamp is made of steel and aluminum protected from corrosion by high-quality polymer paint and zinc-containing primer. Polycarbonate glass is used to protect the LED module;
• Possibility of integration of work of the Light 180 module with the motion sensor;
• DALI / 1-10V / Light flux programming (time dimming);
• IP67 / IK08;
• Made on Philips, Vossloh Schwabe components.