|
Quantity
|
Cost
|
||
|
|
|||
Park LED lamp Stolb Park CUT
Stolb Park CUT is a stylish solution with a minimalist design. There is simple and effective design which is suitable for lighting parks, streets, public squares and parking lots.
The support is made of a profile pipe of 120х120 mm with a wall thickness of 3 mm. The use of such a massive profile is due to the behavior of the supports under wind loads and the movement of vehicles that create vibrations, and as a consequence, the oscillations of the support, which adversely affects the mechanical properties of the support (profile uniformity, resistance of welds and corrosion coating) and LED module and electrical connections. The use of a profile with a smaller cross section, such as 120x60 mm or 100x100 mm will reduce the cost of support, but at the same time it will reduce the mechanical resistance to external conditions and possible damage to electrical equipment and the structure itself. Therefore, our specialists chose the profile 120x120 mm as the main material for the construction of Stolb Park CUT.
The Stolb Park CUT luminaire is protected against corrosion by means of powder coating with preliminary cleaning of the structure and application of a zinc-containing primer. There is a choice of any RAL palette for painting the support without changing the cost. Additionally, gas-thermal zinc spraying at a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 is used to protect the support flange.
Lighting example
The light source is an LED module on high-quality Philips LED components, which guarantees stable operation of the LED light module for 5 years. The power source for this system is the Philips driver, which has the best value for money on the market. This combination allows you to illuminate any area reliable, qualitatively and stylishly (see Fig. 1).
Fig. 1 - Example of pedestrian path lighting with CUT-4 support. Parameters:
- height of supports: 4 m;
- distance between supports: 15 m;
- sidewalk width 3 m.
Features
| Height | 3000/4000/5000/6000 mm |
| Profile | 120х120 мм |
| Profile wall thickness | 3/4 mm |
| Mounting plate thickness | 10 mm |
| Power LED module | 30/40/50/60 W |
| Number LED | 12/24 |
| CRI and color temperature | >70 for 4000K / >70 for 3000K |
| Nominal luminous flux | 3400 - 6900 Lm |
| Residual luminous flux100,000 h | 80% |
| Optics | T2, T3, T4 (default T3) |
| Rated voltage power | 220 - 240 V; 50 - 60 Hz |
| Power factor | > 0.95 |
| Degree of protection | |
| Optical module | IP54 |
| Drivers | IP65 |
| Electrical safety class | I |
| Weight | 55-100 kg |
| Construction materials | |
| Housing | Steel |
| Scatter | PMMA |
| Corrosion protection | Zinc-containing primer, gas-thermal spraying of zinc at a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 |
| Color | Powder coating, any other color according to the RAL palette - under the order without change of cost |
| Operating temperature range | - 35 °C ... +55 °C |
| Application | Pedestrian areas, bicycle paths, parks, squares, alleys, private areas |
| Warranty period | 2 years |
| Country of origin | Ukraine |
| Delivery kit | - lighting support with integrated LED module, driver and optics; - input shield TV-1 with fuse 10A; - anchor device ZST-80 (for supports 3 and 4 m high) and ZST-100 (for supports 5 and 6 m high). |
Visualization of public square lighting
