USD
0
My order

LED street luminaire Schreder Teceo 1 - 53 Watt

Article: Teceo 53

LED street luminaire Schreder Teceo 1 - 53 Watt

MAXIMUM ELECTRICITY SAVINGS

The Teceo luminaire is the ideal tool for improving the level of lighting, saving electric energy and reducing the environmental impact.
Teceo is offered in three overall dimensions:

Тесео 1 -  perfect for lighting residential streets, city roads, bike lanes and parking lots;

Тесео 2 - perfect for large roads, driveways and highways;

Тесео S - a new addition to the Teceo line, which by the estimation of independent organizations is a benchmark in the market of luminaires. Teceo S is intended for use at low altitudes, for example lighting of residential streets, parking lots, bicycle lanes. 

Teceo has flexible LED module combinations, a possibility of current selection and dimming settings (standard set includes driver with 1-10V and DALI control interfaces as well as programmable dimming and motion sensor triggering) for maximum energy and service maintenance savings [more details].

Performing with the rearward bracket combines street lighting with alleys and sidewalks in a single design. The wall bracket is intended for illumination of narrow streets and other poorly lit territories where it's not possible to install a light pole. 

SMART LIGHTING

Teceo luminaires can go in the set with elements of the Schreder OWLET IoT control systems [more details] for offline autonomous operation regime, in offline or interacting network or supplied only with the NEMA 7 connector for installation of other lighting control systems.

Dimming scenarios and function "light on demand" with sensors using can adapt lighting to the real needs of the place and time to create the safest and most comfortable environment [more details].

BACKLIGHT CONTROL - AVOIDING EXCESSIVE LIGHTING

As an option: Some Teceo versions may be equipped with a backlight control system. Due to the additional panel inside the corps of the lamp, the light flow behind the luminaire is minimized, accordingly avoiding getting light inside the houses.

Light distributions without limitation of the backlight

Light distributions with limitation of the backlight

SUPPORTING THE LIGHT FLOW DURING EXPLOITATION

The usual solution takes into account the amortization of the luminous flux over the time, which leads to excessive lighting and, consequently, excessive electricity consumption when installing the luminaire fixtures. Over the time, the light output slowly decreases to the minimum required level by the end of the lifetime of the installation (Graph A).
Teceo luminaires work differently, having the function of constant luminous flux (constant luminous flux - CLO).

Teceo controls its energy consumption during the whole lifecycle of the lamp in autonomous regime and with high accuracy to constantly provide the required level of light flux - no more and no less (Graph B).

Thereby, the CLO function gives the additional energy savings of up to 10% during luminaire exploitation.


Teceo - Constant Light OutputTeceo - Maintaining constant luminous flux


Technical characteristics

Power 53 W
Quantity of LED 24 LED
Color temperature and CRI 3000К - CRI80 4000К - CRI70
Nominal luminous flux (lm)* from 4500 - to 5500 Lm from 5400 - to 6500 Lm
Residual luminous flux 100.000hr tq 25°C** 90%
Optics 5102AS/5137AS (LENSOFLEX®2)
LED module current 700 mА
Nominal supply voltage 220 - 240 V; 50 - 60 Hz
Power coeficient >0.9
Surge protection​​​​ 10 kV
Dimming (DALI or 1-10V)  Present [more details]
Sensor PIR (as an option not available for Teceo S)       [more details]
Opportunity of control [more details]  

Wireless control by the ZigBee protocol

The possibility of supply with NEMA 7 connector for installation of control system (as an option, please specify when ordering)

Bluetooth wireless control

The possibility of supply with a Bluetooth module for program dimming and diagnostics via mobile phone  [more details] (as an option, please specify when ordering)

As part of the Schreder OWLET IoT remote control system

The possibility of supply the Schreder OWLET IoT system with Schreder LUCO P7CM controller [more details(as an option, please specify when ordering)

Luminaire driver programming

Dimming-free, programmable dimming, steady light flux (CLO) [more details]

Degree of protection​​​​

IP 66 (***)

Impact resistance (glass)

IK 08 (****)

Electrical safety class

I or II (***)

Weight

9.6 kg

Aerodynamic resistance​​​​​​ 0.135

Construction materials

 

Housing + lid

Die-casted under the pressure of aluminum alloy

Diffuser

Tempered glass

Color

AKZO 150 gray (any other color RAL or AKZO - custom-made)

Temperature range of operation -40 °C ... +45 °C
Mounting Ø48 - 60 mm for coronary and console installation with adjustable lamp angle (0° - 15°)
Recommended installation height of the luminaire 6 - 7 m
Warranty period 120 months according to the Schreder Guarantee Terms

                    View from the side

 

     

Teceo S

   

Teceo 1  

 

Teceo 2  

A

   

450mm

   

607mm

 

788mm

B

     99mm     113mm  

119mm

                 

 View from the top

 

 

     

Teceo S

 

Teceo 1

 

Teceo 2

C

   

252mm

 

318mm

 

439mm

 

Coronary and console mounting

Coronary

Console

Adjustable lamp angle

Mounting

Universal mounting on the inner pipe with a  diameter 42-60 or 76 mm. Suitable for poles and bracket series ITO.                   

Mounting in an external pipe with a diameter of 60mm. Suitable for poles and brackets ELAYA series.                

Bracket for the poles TILIA


LIGHT DISTRIBUTION

LED optics 5068 - Asymmetric LED optics 5120 - Asymmetric
LED optics 5144 - Asymmetric LED optics 5244 - Asymmetric
LED optics 5245 - Asymmetric LED optics 5246 - Asymmetric
LED optics 5247 - Asymmetric LED optics 5248 - Asymmetric
LED optics 5249 - Asymmetric LED optics 5250 - Asymmetric

POLES AND BRACKETS ITO

The gamma of ITO brackets is designed specifically for aesthetic concordance with the Teceo lamp. This combination offers an integrated solution for urban and suburban lighting.

 

As an option, the Elaya Bracket can be equipped with a low-power static LED to create light accents. 


Sample images for Schreder Teceo


Additional information about this product by phone request

Be the first to review
New review or comment
Login with
Rate the product
Send
$321
В наявності
  • Independent removal from the point of issue;
  • Courier delivery across Kiev;
  • Delivery across Ukraine is carried out by services Nova Poshta, SAT.

More about delivery conditions →

  • Non-cash payment for a legal entity;
  • Payment for goods when ordering with delivery in Ukraine;
  • Payment by Visa / MasterCard payment card;
  • In cash.

Learn more about payment terms →

 

Warranty from the manufacturer 36 months, exchange / return of goods within 14 days.
More about returning and exchanging goods →

 

 

Characteristic
Type of light source Світлодіод
Power 53
Color temperature of light 3000 К, 4000 К
Manufacturer Schreder
Up