Quantity
|
Cost
|
||
|
Lighting set for pedestrian crossings Stolb Park CUT-CW
Stolb Park CUT-CW is a ready-made kit for lighting unregulated pedestrian crossings, both in the city and out of town. This set was created on the basis of the Stolb Park CUT luminaire in which the traffic light of the T7.3 type which works in the mode of yellow color flashing with a frequency of 1 Hz was in addition integrated.
The design is made of a profile pipe of 120х120 mm with a wall thickness of 3 mm. The use of such a massive profile is due to the behavior of the supports under wind loads and the movement of vehicles that create vibrations, and as a consequence, the oscillations of the support, which adversely affects the mechanical properties of the support (profile uniformity, resistance of welds and corrosion coating) and on LED module and electrical connections also. Using a profile with a smaller cross-section, such as 120x60 mm or 100x100 mm, will reduce the cost of support, but at the same time it will reduce the mechanical resistance to external conditions and possible damage to electrical equipment and the structure itself. Therefore, our specialists chose the profile 120x120 mm as the main material for the construction of Stolb Park CUT-CW.
Protection of the lighting set for pedestrian crossings of Stolb Park CUT against corrosion occurs by means of powder painting with preliminary cleaning of a design and drawing of a zinc-containing first coat. There is a choice of any RAL palette for painting the support without changing the cost. Additionally, gas-thermal zinc spraying at a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 is used to protect the support flange.
The light source is an LED module on high-quality Philips LED components, which guarantees stable operation of the LED light module for 5 years. The power source for this system is the Philips driver, which has the best value for money on the market.
The Stolb Park CUT-CW kit has everything you need to install the kit, which simplifies the task for customers to select and purchase equipment for lighting pedestrian crossings.
Features
Height | 3000/4000/5000/6000 mm |
Profile | 120х120 mm |
The wall thickness of the profile | 3/4 mm |
The thickness of the mounting plate | 10 mm |
Power of the LED module | 30/40/50/60 W |
Number of LEDs | 12/24 |
CRI and color temperature | > 70 for 4000K /> 70 for 3000K |
Nominal luminous flux | 3400 - 6900 Lm |
Residual luminous flux100,000 h | 80% |
Optics | T2, T3, T4 (default T3) |
Rated supply voltage | 220 - 240 V; 50 - 60 Hz |
Power factor | ≥0.95 |
Traffic light type | T7.3 |
Degree of protection
|
IP54 IP65 IP65 |
Electrical safety class | I |
Weight | 55-100 kg |
Construction materials
|
Steel PMMA |
Color | Powder coating, any other color according to the RAL palette - under the request without change of cost |
Operating temperature range | -25 ° C ... +55 ° C |
Application | Pedestrian crossings |
Warranty period | 2 years |
Country of origin | Ukraine |
Delivery set
|
|