|
Quantity
|
Cost
|
||
|
|
|||
Autonomous lighting system Smart Stolb SLP CUT
Smart Stolb SLP CUT - is a comprehensive solution developed on the basis of the autonomous lighting system Stolb SLP CUT, which combines a park lighting pole with a built-in LED module and the ability to integrate additional SMART modules:
- USB ports for charging mobile gadgets (optional);
- Wi-Fi module;
- Air quality analysis sensors (optional).
This will not only illuminate the area, but thanks to smart modules create a safe and comfortable space.
Functionality of the lighting system
Programmable dimming
Each support is equipped with an intelligent driver by default, which allows you to program the dimming profiles and to create a graph of light brightness versus time of day (see Fig. 1), which aims to save electricity by reducing light flux during the night.
Fig.1 - Schedule of dimming 100% -70% -50% -70%
Wi-Fi module
The Internet provides a comfortable stay on the street, in the park, in a public square, but in those places where there are problems with it, the LED Smart lamp Stolb Park CUT will provide Wi-Fi coverage thanks to the modem. This modem, depending on how you access the Internet, can have two configurations:
- 3G / 4G Wi-Fi modem that receives the Internet from the 3G / 4G network (tariff package is not included) and distributes it over the Wi-Fi network.
- A Wi-Fi modem that accesses a network with a twisted pair or optical cable and distributes it over a Wi-Fi network.
USB charger
The placement of the Stolb Park CUT Smart Lamp in the park or directly near the recreation area (park benches or picnic areas) allows it to be used as a module for charging mobile phones and tablets thanks to USB sockets placed on it (2 ports of 5V and 2.1A per port) . The phone is placed on a special platform located at a height of 1 m from the ground or a special holder (see Fig. 2).
Fig. 2 - Mobile phone holder for lighting support
Air quality monitoring station
The air quality monitor is becoming an integral part of the lives of megacities. Therefore, the Smart Stolb Park CUT series of park luminaires allows installing an air quality monitoring system in it, which will allow better control of the air condition in the city.
- fixing the concentration of CO2 and PM 2.5 and 10 particles;
- temperature and air humidity.
Features
| Solar panel
| Power: 330 W Panel type: 3.2 mm thick polycrystalline tempered glass, covered with a coating that absorbs solar radiation, the panels are tested according to IEC 61215 for snow loads up to 5400 Pa (approx. 5.4 kN / m2) and IEC 61730. Certificates available : ISO 9001, ISO 14001, OHSAS 18001, ISO 2859-1 |
| LED module |
|
| Controller | MPPT 10A - 24V Degree of protection: IP68 Weight: 1 kg Time of switching on of the lamp is defined by definition of voltage on the solar panel. The MPPT controller, unlike the PWM, allows the most efficient use of all the power of the solar panel (by tracking the maximum power generated by the solar panel). |
| Battery | LiFePO4, 30AH 24V with thermal protection and BMS controller. Suitable for operation at temperatures of -25 ℃ +60 ℃. The battery is equipped with a BMS controller that monitors the battery charging process, as well as the temperature of its operation. |
| Support and bracket
| Height: 4 m. Powder coating, zinc-containing primer. There is a choice of any RAL palette for painting the support without changing the cost. Additionally, gas-thermal zinc spraying at a height of 0.25 m from the support flange in accordance with EN 40-5: 2002 is used to protect the support flange. |
| Anchor device | FP4 |
| Operating time | 8-12 hours per day (at full power of the LED module), the battery capacity is designed for up to 3 full cloudy, rainy and windy days. |
| Installation recommendations | This kit is suitable for areas with an average annual peak solar power of 4 ~ 3.5 hours per day |
| Country-manufacturer | Ukraine |
| Wi-Fi | 3G / 4G module Wi-Fi modem, range 80m |
| Additional features
| Possibility of plowing of a support with powder paint according to the RAL palette Possibility of delivery with the Bluetooth interface together with the software for programming and remote control of the lamp The system configuration can be changed depending on the requirements of the client or the project |