|
Quantity
|
Cost
|
||
|
|
|||
LED Street Luminaire Schreder Teceo 1 - 87 Watt
MAXIMUM ELECTRICITY SAVINGS
The Teceo luminaire is the ideal tool for improving the level of lighting, saving electric energy and reducing the environmental impact.
Teceo is offered in three overall dimensions:
Тесео 1 - perfect for lighting residential streets, city roads, bike lanes and parking lots;
Тесео 2 - perfect for large roads, driveways and highways;
Тесео S - a new addition to the Teceo line, which by the estimation of independent organizations is a benchmark in the market of luminaires. Teceo S is intended for use at low altitudes, for example lighting of residential streets, parking lots, bicycle lanes.
Teceo has flexible LED module combinations, a possibility of current selection and dimming settings (standard set includes driver with 1-10V and DALI control interfaces as well as programmable dimming and motion sensor triggering) for maximum energy and service maintenance savings [more details].
Performing with the rearward bracket combines street lighting with alleys and sidewalks in a single design. The wall bracket is intended for illumination of narrow streets and other poorly lit territories where it's not possible to install a light pole.
SMART LIGHTING
Teceo luminaires can go in the set with elements of the Schreder OWLET IoT control systems [more details] for offline autonomous operation regime, in offline or interacting network or supplied only with the NEMA 7 connector for installation of other lighting control systems.
Dimming scenarios and function "light on demand" with sensors using can adapt lighting to the real needs of the place and time to create the safest and most comfortable environment [more details].
BACKLIGHT CONTROL - AVOIDING EXCESSIVE LIGHTING
As an option: Some Teceo versions may be equipped with a backlight control system. Due to the additional panel inside the corps of the lamp, the light flow behind the lamp is minimized, accordingly avoiding getting light inside the houses.
|
|
|
|
Light distributions without limitation of the backlight |
Light distributions with limitation of the backlight |
SUPPORTING THE LIGHT FLOW DURING EXPLOITATION
The usual solution takes into account the amortization of the luminous flux over the time, which leads to excessive lighting and, consequently, excessive electricity consumption when installing the luminaire fixtures. Over the time, the light output slowly decreases to the minimum required level by the end of the lifetime of the installation. (Graph A).
Teceo luminaires work differently, having the function of constant luminous flux (constant luminous flux - CLO).
Teceo controls its energy consumption during the whole lifecycle of the luminaire in autonomous regime and with high accuracy to constantly provide the required level of light flux - no more and no less (Graph B).
Thereby, the CLO function gives the additional energy savings of up to 10% during luminaire exploitation.
Technical characteristics
| Power | 87 W | |
| Quantity of LED | 40 LED | |
| Color temperature and CRI | 3000К - CRI80 | 4000К - CRI70 |
| Nominal luminous flux (lm)* | from 7600 - to 9300 Lm | from 9000 - to 10900 Lm |
| Residual luminous flux 100.000hr tq 25°C** | 90% | |
| Optics | 5102AS/5137AS | |
| LED module current | 700 mА | |
| Nominal supply voltage | 220 - 240 V; 50 - 60 Hz | |
| Power coeficient | >0.9 | |
| Surge protection | 10 kV | |
| Dimming (DALI or 1-10V) | Present [more details] | |
| Sensor | PIR (as an option not available for Teceo S) [more details] | |
| Opportunity of control [more details] | ||
|
Wireless control by the ZigBee protocol |
The possibility of supply with NEMA 7 connector for installation of control system (as an option, please specify when ordering) | |
|
Bluetooth wireless control |
The possibility of supply with a Bluetooth module for program dimming and diagnostics via mobile phone [more details] (as an option, please specify when ordering) | |
|
As part of the Schreder OWLET IoT remote control system |
The possibility of supply the Schreder OWLET IoT system with Schreder LUCO P7CM controller [more details] (as an option, please specify when ordering) | |
|
Luminaire driver programming |
Dimming-free, programmable dimming, steady light flux (CLO) [more details] | |
|
Degree of protection |
IP 66 (***) |
|
|
Impact resistance (glass) |
IK 08 (****) |
|
|
Electrical safety class |
I or II (***) |
|
|
Weight |
9.6 kg |
|
| Aerodynamic resistance | 0.135 | |
|
Construction materials |
||
|
Housing + lid |
Die-casted under the pressure of aluminum alloy |
|
|
Diffuser |
Tempered glass |
|
|
Color |
AKZO 150 gray (any other color RAL or AKZO - custom-made) |
|
| Temperature range of operation | -40 °C ... +45 °C | |
| Mounting | Ø48 - 60 mm for coronary and console installation with adjustable lamp angle (0° - 15°) | |
| Recommended installation height of the luminaire | 7 - 9 m | |
| Warranty period | 120 months according to the Schreder Guarantee Terms | |
View from the side |
|||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||
View from the top |
|||||||||||||||||
|
|
|
||||||||||||||||
Coronary and console mounting |
||
 |
 |
 |
|
Coronary |
Console |
Adjustable lamp angle |
Mounting |
||
|
|
|
|
|
Universal mounting on the inner pipe with a diameter 42-60 or 76 mm. Suitable for poles and bracket series ITO. |
Mounting in an external pipe with a diameter of 60mm. Suitable for poles and brackets ELAYA series. |
Bracket for the poles TILIA |
LIGHT DISTRIBUTION
| LED optics 5068 - Asymmetric | LED optics 5120 - Asymmetric |
 |
 |
| LED optics 5144 - Asymmetric | LED optics 5244 - Asymmetric |
 |
 |
| LED optics 5245 - Asymmetric | LED optics 5246 - Asymmetric |
 |
 |
| LED optics 5247 - Asymmetric | LED optics 5248 - Asymmetric |
 |
 |
| LED optics 5249 - Asymmetric | LED optics 5250 - Asymmetric |
 |
 |
POLES AND BRACKETS ITO
The range of ITO brackets is designed specifically for aesthetic concordance with the Teceo luminaires. This combination offers an integrated solution for urban and suburban lighting.
 |
|
As an option, the Elaya Bracket can be equipped with a low-power static LED to create light accents. |
Sample images for Schreder Teceo
Additional information about this product by phone request